Product Category

All categories

Contact Us

Number of views:

Die hanger

The English name of lifting sling is lifting sling, which refers to the device for lifting heavy objects in lifting machinery. The most commonly used lifting tools for lifting items are hooks and slings, and others include rings, lifting suction cups, clamps and forks. It is widely used in the lifting industry.
Retail price
Market price
Number of views:
Product serial number
Product description

  The English name of lifting sling is lifting sling, which refers to the device for lifting heavy objects in lifting machinery. The most commonly used lifting tools for lifting items are hooks and slings, and others include rings, lifting suction cups, clamps and forks. It is widely used in the lifting industry.

  Special rigging such as hooks, wire ropes, and chains are commonly used in the spreader. Lifting suction cups, clamps and forks can be used as special spreaders on the crane for a long time, and can also be used as replaceable auxiliary spreaders hanging on the hook for temporary use. They are often used in multi-cargo warehouses and yards to improve work efficiency. The spreader for grabbing bulk materials is generally a grab bucket with a jaw plate that can be opened and closed, and an electromagnetic chuck can also be used to absorb magnetic materials such as metal chips. Commonly used spreaders for lifting fluid materials are buckets and hanging tanks. Generally, molten steel or chemical solutions are discharged by tilting or bottom plugging, and fluid materials such as concrete are discharged by opening the bottom door of the hanging tank. In order to meet the daily maintenance and lifting of large machinery, some domestic sling companies have also designed some special spreaders, such as fan spreaders, tower spreaders, blade spreaders, hub spreaders, steam turbines and other non-standard spreaders. Tool.

  (1) During the use of the spreader, if the rotation of the twist lock is inflexible or not in place, check and adjust the adjusting nut, and then check the following parts: ① Whether the tension spring of the ratchet is damaged, and if it is damaged, it should be replaced; ② Whether the transmission mechanism is stuck, if it is stuck, it is poorly lubricated, and lubricating oil (or grease) should be added to the movable connection of the transmission mechanism. If the guide pin is too tight, loosen the nut properly. If the connection is loose, the transmission tube or other rods are deformed, it should be corrected; ③ Whether the stretch of the buffer spring is too small, if it is too small, the length of the wire rope connected to the buffer spring should be shortened. (2) During use, prevent the indicator paint on the indicator plate of the spreader from falling off. Once found, it is necessary to replenish the paint with the original instruction mark in time. (3) For the steel wire rope on the spreader, it should be cleaned and lubricated with lubricating oil or grease in time, especially at the bend of the steel wire rope. (4) For the main stress-bearing components, rings, twistlocks, ear plates and rigging shackles, under normal use conditions, they should be inspected at least once every 3 months, and there must be no cracks or serious deformation. (5) For all oil cups, including the ratchet mechanism oil cup, the oil cup on the sliding bearing seat and the oil cup of the twist lock box, the main movable joints should be filled with lubricating oil in a timely manner according to the usage conditions. (6) Frequently check whether the rope clamp is loose, whether the buffer spring is overstretched, and deal with the problem in time. (7) Each type of spreader must not exceed the rated lifting capacity, and the buffer spring must not be overstretched. (8) During the hoisting process, it should be hoisted smoothly to avoid deformation due to mutual collision between the spreader and the crane or other equipment.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
High frequency inspection well mold
  The high-frequency vibration motor relies on the frequency-modulated power supply to adjust the frequency of the motor to high-speed rotation and drives the eccentric wheel to make a circular motion, thereby generating vibration, and the vibration is transmitted to the end cover and even the casing through the raceway. The vibrator has long service life, high efficiency, large vibration amplitude, strong excitation force, no vibration loss phenomenon, compact structure, convenient use, few wearing parts and easy maintenance. It can be widely used in concrete tamping construction and other occasions that require a vibration source.   High-frequency vibrators are mainly used for prefabricated concrete components of railways, highways, highway bridges, and engineering buildings. Its vibration frequency is more than three times higher than that of ordinary vibrators. obviously decrease. It can save cost, speed up project progress and improve project quality.   The high-frequency vibrator has high excitation frequency (180HZ/S), large excitation force (12KN), small amplitude (1.3mm), and large radiation range (1.5m). The fluidity and plasticity of concrete are increased, and the compactness of components is improved. The molding is fast, and the quality can be greatly improved. It can run at a high speed of 9800 revolutions per minute.   Reduce template loss. Due to the high vibration frequency and small amplitude, less energy is consumed in the deformation of the steel formwork, which prolongs the service life of the formwork.   Easy to use. Due to its small size, light weight (only 23 kg/set), and the quick-loading structure, it only needs to be tightened with one screw to fix it on the formwork. It only takes 30 seconds to load and unload a vibrator, which saves 75% of the auxiliary installation time and 75% of manpower compared with the use of ordinary external vibrators.   The service life is more than four times that of ordinary vibrators. Due to the extremely high vibration efficiency of the ZKF vibrator, it only takes 30 to 40 seconds to stop each vibration, so the service life of the vibrator is greatly improved, the maintenance cost is reduced, and the construction cost is reduced.   Due to the strong excitation force, it can also be formed at one time for the construction of taller bridge columns.   It is the earliest high-frequency fast-loading vibrator in China. After nearly ten years of continuous technical improvement, the technology is very mature.   The product quality is reliable and excellent, the service life is long, and the quick-installation structure is adopted, which can significantly speed up the beam-making speed.   The construction quality has been significantly improved, and has been recognized and praised by many project departments and supervision departments.
High frequency inspection well mold
Double station mandrel host
  The inspection well is set up for the maintenance of urban underground infrastructure such as power supply, water supply, drainage, sewage discharge, communication, cable TV, gas pipes, and street lamp lines, and is convenient for installation. It is generally installed at the intersection of pipelines, turning places, pipe diameter or slope changes, and at certain distances on straight pipe sections, which is convenient for regular inspection of ancillary structures.   The inspection well is used in the construction area (residential area, public building area, factory area, etc.) to buried plastic drainage pipes with an outer diameter of no more than 800mm and a buried depth of no more than 6m. Or slope changes, water drops, etc., for the convenience of regular inspection, cleaning and dredging, or well-shaped structures made of plastic injection molding or bricks for downhole operation and inspection. The plastic integrated injection molding inspection well means that the main well block that constitutes the inspection well is formed by one-time injection molding, the well shaft socket adopts a 360-degree ring-shaped bearing platform, the well body and the bottom of the well seat use mesh reinforcement ribs, and each socket adopts ring-type reinforcement. Rib design. Depending on the number and angle of connection, there are initial well bases, straight well bases, 45-degree elbow well bases, three-way well bases, and four-way well bases. In order to adapt to various drainage conditions, plastic inspection wells are equipped with plastic integral injection molding accessories such as reducing joints, confluence joints, and multi-joints in the wellbore. To ensure the smoothness and tightness of the entire drainage system.   1) Plastic drainage inspection well projects with buried drainage pipes with an outer diameter of no more than 1200mm and a buried depth of no more than 8m in building areas (residential areas, public building areas, factory areas, etc.), urban and rural municipalities, industrial parks, old city renovations, etc. Design, construction and maintenance. 2) Construction of plastic drainage inspection wells under the conditions of general soil, soft soil, seasonal frozen soil and collapsible loess; 3) Areas where the seismic fortification crack degree is 9 degrees or below. 4) The ground load of the general driveway is designed according to the total vehicle weight of 15t (the rear wheel pressure is 5t); the ground load of the fire lane is designed according to the total vehicle weight of 30t (the rear wheel pressure is 6t). 5) The groundwater level is designed to be no higher than 1.0m below the ground;
Double station mandrel host


Username used for comment:

contact Us

Add: No. 4, Bangwei Road, Longchuan Industrial Park, Jiangdu District, Yangzhou City, Jiangsu Province

13901452222 (Mrs. shuai)



Mobile Website

Copyright:Jiangsu Bangwei Machinery Manufacturing Co., Ltd    SEO    Power    Business License